SRX Services Gateway
Highlighted
SRX Services Gateway

srx active/passive cluster

‎06-25-2014 08:46 AM

folks

 

i have an srx 650 in production and i need to introduce an another box and create a ha pair

 

can anyone point me in the right direction with a configuration guide please?

 

i can get some downtime if needed but only an hour at most

 

thanks to anyone taking the time to respond

2 REPLIES 2
Highlighted
SRX Services Gateway
Solution
Accepted by topic author mulhollandm
‎08-26-2015 01:27 AM

Re: srx active/passive cluster

‎06-25-2014 02:29 PM

The basic steps for the SRX650 are listed in KB15503.

 

http://kb.juniper.net/InfoCenter/index?page=content&id=KB15503

 

the process does require reboots on both nodes during the setup but you should have no issue finishing within the hour window.

 

Do note that the links between the nodes are assigned specific ports for each SRX device.  So you might have to move some existing configuration to a different port if you are already using the cntl or fab ports for something else.

Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home
Highlighted
SRX Services Gateway

Re: srx active/passive cluster

‎06-27-2014 05:01 AM

spuluka

 

many thanks for this, its greatly appreciated

Feedback