ScreenOS Firewalls (NOT SRX)
ScreenOS Firewalls (NOT SRX)

IPad ans SSG WebUI

01.10.12   |  
‎01-10-2012 06:23 AM


I am trying to use an iPad 2 (5.0.1) to manage a SSG firewall (6.3.R10) using the WebUI. The webui is not working correctly. Clicking on the + open the sub division but than the behavior becomes heratic. Clicking + again does not close it but sometimes does. Clicking to open a second level devision never works.


As I could find nothing in the KB nor on Google, I am wondering if I am the only one having the issue and so where is my mistake?


Thanks for sharing your experience




ScreenOS Firewalls (NOT SRX)

Re: IPad ans SSG WebUI

01.11.12   |  
‎01-11-2012 05:35 AM

Hi Michel,


The Safari browser (whether on Macs or iOS devices) is not one we support for ScreenOS. There are no plans to change that. 


Sorry for the inconvenience.



ScreenOS Firewalls (NOT SRX)

Re: IPad ans SSG WebUI

01.11.12   |  
‎01-11-2012 08:31 AM

It is not iPad behavior - it is Safari behavior. If you hit it with a Safari browser from any Apple device you will experience the same "intermittent" click behavior. I have found that if you try and open another object, then go back to the first object you can then open / close, etc...

Kevin Barker
Juniper Networks Certified Instructor
Juniper Networks Ambassador

Juniper Elite Reseller
J-Partner Service Specialist - Implementation

If this worked for you please flag my post as an "Accepted Solution" so others can benefit. A kudo would be cool if you think I earned it.
ScreenOS Firewalls (NOT SRX)

Re: IPad ans SSG WebUI

01.12.12   |  
‎01-12-2012 11:32 PM
Thank you all. I was expecting something like that. I have tested a few other browser on the iPad but could not find any other one that is working smoothly with the ssg Webui. If anyone has an advice, it will safe me the effort of downloading each of them to make a test. Michel