Hi Expert,
I have two 520M juniper firewalls in HA(Master and backup)
Now I am about to configure monitoring tool to monitor both firewalls and wanna access to both firewalls for management purpose.
I have assigned IPs as follows:
Master juniper:
set interface ethernet0/0.4 ip 10.1.174.1/25
set interface ethernet0/0.4 route
set interface ethernet0/0.4 manage-ip 10.1.174.2
Backup Juniper:
set interface ethernet0/0.4 ip 10.1.174.1/25
set interface ethernet0/0.4 route
set interface ethernet0/0.4 manage-ip 10.1.174.3
The problem is I can only access to master juniper using "Manage IP-10.1.174.2". At the same time I can't access backup juniper using "Manage IP-10.1.174.3".
But If I manually change the backup juniper to act as a master, Then I can access the firewall using "Manage IP-10.1.174.3" but can't access "Manage IP-10.1.174.2( now it's in backup juniper)".
Hence, I can only access to master juniper using "Manage IP". please help me to advice on what should I do to access both firewall at the same time.
Thanks in Advance!
Regards,
Sona