Screen OS

last person joined: 8 months ago 

This is a legacy community with limited Juniper monitoring.

  • 1.  Memory Address Test Failed

    Posted 11-10-2008 03:58

    Hi Everyone,

    This message appears on the Firewall device 'Memory Address Test Failed' when trying to boot it up.This message is being displayed on connecting through the console.



  • 2.  RE: Memory Address Test Failed

    Posted 11-11-2008 00:11

    it could be happen with different sort of reasons, is this causing you to perform firewall activities?

     

    what image are you using, and scenario, that would help us to analyze the problem.

     

    thanks

    Raheel Anwar

     



  • 3.  RE: Memory Address Test Failed

    Posted 11-11-2008 05:10

     

    Hi hadywahl,

     

    Can you edit and paste the full boot up message here? Also, what version of software are you using, and are you seeing any problems (i.e, firewall fails to bootup).

     

    Regards,

    A



  • 4.  RE: Memory Address Test Failed

    Posted 11-15-2008 23:43

    Hi everyone,

    This is the message the output of the firewall device from console when trying to boot up.I hope this piece of information will be of help.

     

     

    ScreenOS Boot ROM  v3.32 (Build 366D)

    (c)1997-2000 Netscreen Technologies, Inc. All rights reserved

     

    RM7000 CPU, Revision 33

    16KB I cache, 16KB D cache

    256KB Secondary Cache

    Detect SDRAM (0C,0A,04,02)......   256MB SDRAM, 2 Banks

    SRAM OK!

    Config Ethernet Device

    Done!

     

    NetScreen Technologies, Inc

    NetScreen 500 Load Software

    Copyright, 1997-2001

    Version 1.9

     

    Hit any key for Boot/Diag mode

    Hit any key for Boot/Diag mode

    Hit any key for Boot/Diag mode

    Hit any key for Boot/Diag mode

     

    Load System Image From Flash

    ********ignore image authentication!

    Load image to address 0x80060000

     

     Start loading...

    ....................................................................

    Done.

       

    Juniper Networks, Inc

    NS-500 System Software

    Copyright, 1997-2004

     

    Version 5.00r9.0

    Init Heap (1660010/cf9fbf0,32, 00000000/00000000)

    Rev.D Sagittarius board

    GT64120 revision id: 0x11

    Load NVRAM Information ... (5.0)Done

    Detected SRAM memory size 1048576

    Memory Test: b7800000,100000 .......Memory Address Test failed at b7800004: b780

    0044

    Memory Address Test failed at b780000c: b780004c

    Memory Address Test failed at b7800014: b7800054

    Memory Address Test failed at b780001c: b780005c

    Memory Address Test failed at b7800024: b7800064

    Memory Address Test failed at b780002c: b780006c

    Memory Address Test failed at b7800034: b7800074

    Memory Address Test failed at b780003c: b780007c

    Memory Address Test failed at b7800084: b78000c4

    Memory Address Test failed at b780008c: b78000cc

     



  • 5.  RE: Memory Address Test Failed
    Best Answer

    Posted 11-17-2008 07:09

     

     

    Hi hadywahl,

     

    It looks like the hardware has failed. If you have active support, I would open a JTAC case.

     

    Regards,

    A.