ScreenOS Firewalls (NOT SRX)
Highlighted
ScreenOS Firewalls (NOT SRX)

Multilink serial issues

‎01-07-2010 08:34 AM

I have two t1's (external CSU's) set up in a multilink bundle.  They both work fine for a while and the one link gives the following error:

"PPP on serial1/0 ( in ml1 ) resets LCP for LCP finished"

This repeats continuously until the SSG20 is rebooted.  Once this is done it works great again for a while (day or two) and then the above error repeats and the one link goes down until the SSG is rebooted. 

Any ideas to what could be causing this issue.  I would think that if it was a circuit or CSU/DSU issue a reboot would not correct the problem.

2 REPLIES 2
Highlighted
ScreenOS Firewalls (NOT SRX)

Re: Multilink serial issues

‎01-07-2010 11:54 AM

Hi,

 

What is the ScreenOS on the box? 

 

-John

John Judge
JNCIS-SEC, JNCIS-ENT,

If this solves your problem, please mark this post as "Accepted Solution". Kudos are appreciated.
Highlighted
ScreenOS Firewalls (NOT SRX)

Re: Multilink serial issues

‎01-07-2010 11:57 AM

6.2r1