ScreenOS Firewalls (NOT SRX)
ScreenOS Firewalls (NOT SRX)

SFTP Support in SceeenOS 6.1 - SSG-320M

[ Edited ]
01.15.10   |  
‎01-15-2010 09:17 AM

I note that SFTP is not supported in 5.0 and 6.0. However isn't this available by simply allowing SSH?

 

Can anyone please confirm the satus for this protocol in 6.1?

any reference would be really useful too.

 

thanks in advance

anawaz

Ajaz Nawaz
JNCIE-SEC#254 CCIE#15721
JNCIA-FWV | JNCIS-FWV
JNCIA-JUNOS | JNCIS-SEC
JNCIP-SEC | JNCIE-SEC
CCNP-Collaboration
4 REPLIES
ScreenOS Firewalls (NOT SRX)

Re: SFTP Support in SceeenOS 6.1 - SSG-320M

01.18.10   |  
‎01-18-2010 01:26 AM
anyone..? :-(
Ajaz Nawaz
JNCIE-SEC#254 CCIE#15721
JNCIA-FWV | JNCIS-FWV
JNCIA-JUNOS | JNCIS-SEC
JNCIP-SEC | JNCIE-SEC
CCNP-Collaboration
ScreenOS Firewalls (NOT SRX)

Re: SFTP Support in SceeenOS 6.1 - SSG-320M

01.18.10   |  
‎01-18-2010 02:45 AM

You can use scp, you just need to enable it, this might work for you?

http://help.juniper.net/help/english/6.0.0/cfg_mgt_cnt.htm

 

What do you want to use sftp for?

ScreenOS Firewalls (NOT SRX)

Re: SFTP Support in SceeenOS 6.1 - SSG-320M

01.18.10   |  
‎01-18-2010 02:48 AM

Hi

 

I think its the protokoll itself... is it ftp over ssh? or over ssl....

you make a ssh for authentication, the the rest ist encrypted? dynmaic port konfig between server and client?

 

 

Highlighted
ScreenOS Firewalls (NOT SRX)

Re: SFTP Support in SceeenOS 6.1 - SSG-320M

01.28.10   |  
‎01-28-2010 12:55 AM

I had to do this on a SSG 140, running 6.2

 

You need to change the SSH management port to something other than 22, don't enable it for management with SSH

 

Then create an SFTP service and apply to your policies/VIP/MIP etc