ScreenOS Firewalls (NOT SRX)
ScreenOS Firewalls (NOT SRX)

SSG-500 with SSG-500M

[ Edited ]
05.22.08   |  
‎05-22-2008 03:44 AM

Is it possible to have cluster A/A or A/P between SSG-550 and SSG-550M?

Theoretically, they are supposed to work, but I want to know if Juniper doesn't recommend such setup, or if anybody has experienced any problems while doing so?  

Message Edited by gr33ndata on 05-22-2008 01:46 PM
Gr33n Data
JNCIS-FWV, JNCIA-IDP

@gr33ndata

http://gr33ndata.blogspot.com/
2 REPLIES
ScreenOS Firewalls (NOT SRX)

Re: SSG-500 with SSG-500M

05.22.08   |  
‎05-22-2008 06:24 AM

Yes, this is supported.  This is from 5.4 release notes:

 

"Note: When using an SSG 500 device and an SSG 500M Series device in an NSRP environment, both devices must be running ScreenOS 5.4r2 or later. Both devices must be one of the following clusters: SSG 520 and SSG 520M NSRP cluster or SSG 550 and SSG 550M NSRP cluster."

 

Regards,

Highlighted
ScreenOS Firewalls (NOT SRX)

Re: SSG-500 with SSG-500M

06.23.08   |  
‎06-23-2008 04:00 PM
Thanks a lot
Gr33n Data
JNCIS-FWV, JNCIA-IDP

@gr33ndata

http://gr33ndata.blogspot.com/