ScreenOS Firewalls (NOT SRX)
Highlighted
ScreenOS Firewalls (NOT SRX)

SSG-520

‎07-05-2014 02:43 PM

Hi all, i bought one SSG-520  but in front panel is writed J4350 (pobably converted)

now... is working good but Junos 8.4, i want back to screen os , how i can do?

I registered in Juniper and it result still as SSG series.

There is no way to flash card frim image or some other way?

Any help are really apreciated!

Thank you1

3 REPLIES 3
Highlighted
ScreenOS Firewalls (NOT SRX)

Re: SSG-520

‎07-06-2014 03:24 AM

When you get a conversion kit they swap the flash drive with the one provided in the conversion kit with the new faceplate.

 

Check with the seller to see if they still have the original flash drive that will boot to ScreenOS.

 

I don't think you can format these outside Juniper TAC.

Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home
Highlighted
ScreenOS Firewalls (NOT SRX)

Re: SSG-520

‎07-07-2014 05:29 AM

Hi, thank for your reply, i tried to ask to reseller but he told me that they dont have...

How much can be for JTAC (one year subscriprion)?

Point is that  on device is Jseries but on website result SSG series, then i can download screenOS but not junos and i cannot do no one update 😞

 

It is no possible to make dd image from another device?

Thank anyone for replies

Highlighted
ScreenOS Firewalls (NOT SRX)

Re: SSG-520

‎07-07-2014 09:07 AM

There is not a way to restore the bootloader and OS.  You would need to get the J to SSG converstion kit which contains a new CF card.  Going from SSG to J, it does not require replacing the CF card, so it is possible that this is the original CF card.

Feedback