ScreenOS Firewalls (NOT SRX)
ScreenOS Firewalls (NOT SRX)

Secondary HA path vs NSRP interface

04.29.12   |  
‎04-29-2012 07:14 AM

Hello All,

I have ss140 Active/Backup cluster with one dedicated HA link managed from NSM. I have configured secondary HA link using L3 interface. Everything is fine but in NSM there are two options in nsrp configuration window: Secondary HA path and NSRP interface. Anyone knows what’s the difference between them and what is NSRP interface.

Regards
atraper

2 REPLIES
ScreenOS Firewalls (NOT SRX)
Solution
Accepted by topic author atraper
‎08-26-2015 01:27 AM

Re: Secondary HA path vs NSRP interface

05.02.12   |  
‎05-02-2012 12:43 AM

Hi,

 

This is for very old ScreenOS releases and smaller firewalls that did not support a HA zone. A pair of data interfaces could be used for the NSRP traffic. I am not sure this would work with the modern releases.

Simply ignore these settings.

Kind regards,
Edouard
Highlighted
ScreenOS Firewalls (NOT SRX)

Re: Secondary HA path vs NSRP interface

05.02.12   |  
‎05-02-2012 03:28 PM

Thanks Edouard!