ScreenOS Firewalls (NOT SRX)
ScreenOS Firewalls (NOT SRX)

firmware update 5gt

05.04.10   |  
‎05-04-2010 07:48 PM

Hello,

 

I have some problems about  firmware update on netscreen 5gt version 6.2

 

1. Is there any know issue when I update from 4.0.0r2.3 to 6.2?

2. I got the message "The uploaded file cannot be recognized as a valid software image file. Please double-check with your supplier"

3. 4.0.0r2.3 only can be useing with IE6, It' a trouble.

 

Thanks for help

 

Richie S. Lee

Attachments

9 REPLIES
Highlighted
ScreenOS Firewalls (NOT SRX)

Re: firmware update 5gt

05.04.10   |  
‎05-04-2010 09:43 PM

That is a pretty big jump in ScreenOS code.  You may want to do a step upgrade first before jumping to 6.2.  I believe between ScreenOS 4.0 and 5.0 there were some changes to the file structure.  You may want to go with ScreenOS 5.0 first, verify that loads and then move on from there.  Remember also that you need to unzip the ScreenOS files when you download them before you upload them as well.  Hope this helps you out.

 

JNCIE-ENT #424 JNCIP-SEC, JNCI
Juniper Ambassador
@traceoptions

**If this worked for you please flag my post as an Accepted Solution so others can benefit.**
ScreenOS Firewalls (NOT SRX)

Re: firmware update 5gt

05.04.10   |  
‎05-04-2010 11:03 PM

But I cannot find screenos 5.0 on this website, The Oldest is 5.1, And I got the same message.

ScreenOS Firewalls (NOT SRX)

Re: firmware update 5gt

05.05.10   |  
‎05-05-2010 04:24 AM

Richie,

 

You should be upgrading to 5.0.0r11 , its end of support though

You might want to check with Juniper TAC , based on your support status they might provide the required OS

 

Also i saw the screen shot , did you unzip the file that you downloaded from the website before trying to browse and install it ?

Cheers,
Rog
ScreenOS Firewalls (NOT SRX)

Re: firmware update 5gt

05.05.10   |  
‎05-05-2010 07:35 AM

H'mm are you sure you are using 5gt code, not ssg5? That would explain this message. 

best regards,

Screenie.
Juniper Ambassador,
JNCIA IDP AC WX JNCIS FW SSL JNCIP SEC ENT SP JNCI

If this worked for you please flag my post as an "Accepted Solution" so others can benefit. A kudo would be cool if you think I earned it.
ScreenOS Firewalls (NOT SRX)

Re: firmware update 5gt

05.05.10   |  
‎05-05-2010 04:47 PM

Yes! I unziped The file "ns5gt.5.1.0r4e.0.zip" to "ns5gt.5.1.0r4e.0"

ScreenOS Firewalls (NOT SRX)

Re: firmware update 5gt

05.05.10   |  
‎05-05-2010 07:48 PM

Thanks a lot for your helps.

I cannot find screen 5.0

so I update firmware by CLI command

And already update to 6.2.

ScreenOS Firewalls (NOT SRX)

Re: firmware update 5gt

05.06.10   |  
‎05-06-2010 07:04 AM

Glad to know you have upgrade successfully !

 

however just note 6.2 is a heavy Screenos for 5gts and you will see the memory bar in RED

nothin to be worried about  thou.

Cheers,
Rog
ScreenOS Firewalls (NOT SRX)

Re: firmware update 5gt

05.06.10   |  
‎05-06-2010 07:01 PM

Thanks

But I saw  my 5gt's memory bar still in green condition.

Attachments

ScreenOS Firewalls (NOT SRX)

Re: firmware update 5gt

09.25.10   |  
‎09-25-2010 02:29 PM

then all is well !

Cheers,
Rog