ScreenOS Firewalls (NOT SRX)
Highlighted
ScreenOS Firewalls (NOT SRX)

netscreen5400 boot loader image fails authentication

‎07-30-2015 12:51 AM

Dear all

 

We have high end netscreen5400 firewall; the firewall lost its Bootloader and Image files. We tried to install a new loader and image files to the firewall, but we failed as all the images in juniper site were changed to request authentication for the image during the image installation on the firewall.

https://kb.juniper.net/InfoCenter/index?page=content&id=TSB16495

 

I think the workaround is to install the old loader and image files which don’t request for this authentication; below message we got:

 

********Invalid DSA signature

********Bogus image - not authenticated

 

 

Can anyone provide a link to download these old images or if you can find them as below;

 

Bootloader image: 1.0.3

Firewall image       : 6.3.0r11.0

 

 

 

Regards

Mohammad Natour

 

1 REPLY 1
Highlighted
ScreenOS Firewalls (NOT SRX)

Re: netscreen5400 boot loader image fails authentication

‎07-30-2015 03:51 AM

You will need to open a JTAC support ticket for this.  The support engineers can get EOL versions of files for you on a case by case basis in situations like this.

Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home
Feedback