ScreenOS Firewalls (NOT SRX)
Highlighted
ScreenOS Firewalls (NOT SRX)

no VLAN Tag available for new sub interface

‎10-16-2011 05:42 PM

Hi,

 

I am trying to add a new sub interface and set the VLAN tag, however there is no VLAN Tag box when I add the interface.  There is also no Tag column on the interfaces list in the WebUI.

 

I am using an SSG520 running ScreenOS 6.2.0r10.0

 

The firewall was recently decommissioned in one location, wiped, upgraded to this version of ScreenOS and has now been deployed in a new datacentre.  Previously running 6.1.0 I have had no issue adding the VLAN tagging to a sub interface.

 

Is there a setting I need to enable to turn on this option?

 

Thanks,

James

 

 

1 REPLY 1
Highlighted
ScreenOS Firewalls (NOT SRX)

Re: no VLAN Tag available for new sub interface

‎10-16-2011 06:54 PM

The column won't appear in the web table until the first sub-interface is created with a tag.  But the tag box should appear in the new sub-interface menu in 6.2.

 

You could create it on the command line if the web UI is a problem.

 

> set interface e0/1.2 tag 10 zone trust
> set interface e0/1.2 ip 192.168.2.1/24

 

Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home