Training and Certification

I preparing JNCIP-SEC exam. For this i am using JUNOS Security Configuration Guide. Most of the exam topics are cover in this guide except Virtualization. This guide contains nothing regarding Virtualization. Guide me from where I can prepare this topic.

Regards

I've been researching these JNCIP/E topics too.  This is what I have for the Virtualization section of the exam.

JNCIP-SEC Objective

Virtualization
    •    Given a scenario, describe and configure routing-instances
    ◦    JUNOS routing instance types used for virtualization
    ◦    Implement virtual routing-instances
    ◦    Selectively forward traffic between virtual routing-instances
    ◦    Implement filter-based forwarding


SRX Examples of Routing instances

http://www.juniper.net/techpubs/en_US/junos11.3/topics/example/virtual-router-srx-use-case-edu-configuring.html

http://www.juniper.net/techpubs/en_US/junos11.3/topics/concept/virtual-router-srx-use-case-edu-overview.html

routing instances configuration guide - this is really for the bigger devices but I've seen most of these features also in the SRX examples.  And I could not find any other overall introduction on the documentation site that was just for SRX.

http://www.juniper.net/techpubs/en_US/junos11.4/information-products/topic-collections/config-guide-routing/gen/config-guide-routing-routing-instances.pdf

SRX overall routing guide - but this only has two pages on routing instances.

http://www.juniper.net/techpubs/en_US/junos11.4/information-products/topic-collections/security/software-all/routing/junos-security-swconfig-routing-protocols-and-policies.pdf

Its more than enough

thanks Steve Puluka