WLA/WLC Series
Highlighted
WLA/WLC Series

WLC 880R recognizes only 8 WLA HELP!!

‎10-02-2013 06:04 PM

I have 19 WLA connected to a WLC880R through a EX4200 switch, but the WLC880R only recognizes 8 of them...

 

The configuration of the WLC880R is this:

 

 

WLC880R# show configuration
# Configuration nvgen'd at 2013-10-02 16:55:58
# Image 7.7.1.6.0
# Model WLC880R
# Last change occurred at 2013-10-02 16:52:06
set ip dns enable
set ip dns server 172.16.5.40 PRIMARY
set ip dns server 172.16.5.108 SECONDARY
set ip route default 172.16.2.1 1
set system name WLC880R
set system ip-address 172.16.2.10
set system countrycode CA
set timezone Ecuador 5 0
set service-profile Hola ssid-name Prueba-Juniper
set service-profile Hola auth-fallthru web-portal
set service-profile Hola psk-encrypted 15425c0d002f727d2b6560274203420205050a0b0a050d0149130e0904045701060f595705595352465156025d045d701d17591b061643095b552f7c767b306275
set service-profile Hola web-portal-acl portalacl
set service-profile Hola wpa-ie cipher-tkip enable
set service-profile Hola wpa-ie auth-psk enable
set service-profile Hola wpa-ie auth-dot1x disable
set service-profile Hola rsn-ie cipher-ccmp enable
set service-profile Hola rsn-ie auth-psk enable
set service-profile Hola rsn-ie auth-dot1x disable
set service-profile Hola rsn-ie enable
set service-profile Hola attr vlan-name Wireless_inv
set service-profile Wireless ssid-name Wireless
set service-profile Wireless ssid-type clear
set service-profile Wireless auth-fallthru web-portal
set service-profile Wireless web-portal-acl portalacl
set service-profile Wireless wpa-ie auth-dot1x disable
set service-profile Wireless rsn-ie auth-dot1x disable
set service-profile Wireless attr vlan-name Wireless
set enablepass password 025f1c18b48f002a7bb4d867240ef312a222
set authentication web ssid Wireless ** local
set authentication web ssid Prueba-Juniper ** local
set user admin password encrypted 070e25414707
set radio-profile default service-profile Wireless
set radio-profile default service-profile Hola
set ap auto mode disable
set ap auto radio 1
set ap auto radio 2
set ap 1 serial-id pb3512274439 model WLA322-WW
set ap 1 name WLA01
set ap 1 remote-ap wan-outage mode enable
set ap 1 remote-ap wan-outage extended-timeout 72h
set ap 1 radio 1 mode enable
set ap 1 radio 2 mode enable
set ap 2 serial-id pb3512292034 model WLA322-WW
set ap 2 name WLA02
set ap 2 remote-ap wan-outage mode enable
set ap 2 remote-ap wan-outage extended-timeout 72h
set ap 2 radio 1 mode enable
set ap 2 radio 2 mode enable
set ap 3 serial-id pb3512274558 model WLA322-WW
set ap 3 name WLA03
set ap 3 remote-ap wan-outage mode enable
set ap 3 remote-ap wan-outage extended-timeout 72h
set ap 3 radio 1 mode enable
set ap 3 radio 2 mode enable
set ap 4 serial-id pb3512274521 model WLA322-WW
set ap 4 name WLA04
set ap 4 remote-ap wan-outage mode enable
set ap 4 remote-ap wan-outage extended-timeout 72h
set ap 4 radio 1 mode enable
set ap 4 radio 2 mode enable
set ap 5 serial-id pb3512320228 model WLA322-WW
set ap 5 name WLA05
set ap 5 remote-ap wan-outage mode enable
set ap 5 remote-ap wan-outage extended-timeout 72h
set ap 5 radio 1 mode enable
set ap 5 radio 2 mode enable
set ap 6 serial-id pb3512274573 model WLA322-WW
set ap 6 name WLA06
set ap 6 remote-ap wan-outage mode enable
set ap 6 remote-ap wan-outage extended-timeout 72h
set ap 6 radio 1 mode enable
set ap 6 radio 2 mode enable
set ap 7 serial-id pb3512274085 model WLA322-WW
set ap 7 name WLA07
set ap 7 remote-ap wan-outage mode enable
set ap 7 remote-ap wan-outage extended-timeout 72h
set ap 7 radio 1 mode enable
set ap 7 radio 2 mode enable
set ap 8 serial-id pb3512321109 model WLA322-WW
set ap 8 name WLA08
set ap 8 remote-ap wan-outage mode enable
set ap 8 remote-ap wan-outage extended-timeout 72h
set ap 8 radio 1 mode enable
set ap 8 radio 2 mode enable
set ap 9 serial-id pb3512274382 model WLA322-WW
set ap 9 name WLA09
set ap 9 remote-ap wan-outage mode enable
set ap 9 remote-ap wan-outage extended-timeout 72h
set ap 9 radio 1 mode enable
set ap 9 radio 2 mode enable
set ap 10 serial-id pb3512321095 model WLA322-WW
set ap 10 name WLA10
set ap 10 remote-ap wan-outage mode enable
set ap 10 remote-ap wan-outage extended-timeout 72h
set ap 10 radio 1 mode enable
set ap 10 radio 2 mode enable
set ap 11 serial-id pb3512320153 model WLA322-WW
set ap 11 name WLA11
set ap 11 remote-ap wan-outage mode enable
set ap 11 remote-ap wan-outage extended-timeout 72h
set ap 11 radio 1 mode enable
set ap 11 radio 2 mode enable
set ap 12 serial-id pb3512321065 model WLA322-WW
set ap 12 name WLA12
set ap 12 remote-ap wan-outage mode enable
set ap 12 remote-ap wan-outage extended-timeout 72h
set ap 12 radio 1 mode enable
set ap 12 radio 2 mode enable
set ap 13 serial-id pb3512240060 model WLA322-WW
set ap 13 name WLA13
set ap 13 remote-ap wan-outage mode enable
set ap 13 remote-ap wan-outage extended-timeout 72h
set ap 13 radio 1 mode enable
set ap 13 radio 2 mode enable
set ap 14 serial-id pb3512321772 model WLA322-WW
set ap 14 name WLA14
set ap 14 remote-ap wan-outage mode enable
set ap 14 remote-ap wan-outage extended-timeout 72h
set ap 14 radio 1 mode enable
set ap 14 radio 2 mode enable
set ap 15 serial-id pb3512320889 model WLA322-WW
set ap 15 name WLA15
set ap 15 remote-ap wan-outage mode enable
set ap 15 remote-ap wan-outage extended-timeout 72h
set ap 15 radio 1 mode enable
set ap 15 radio 2 mode enable
set ap 16 serial-id pb3512274566 model WLA322-WW
set ap 16 name WLA16
set ap 16 remote-ap wan-outage mode enable
set ap 16 remote-ap wan-outage extended-timeout 72h
set ap 16 radio 1 mode enable
set ap 16 radio 2 mode enable
set ap 17 serial-id pb3512274525 model WLA322-WW
set ap 17 name WLA17
set ap 17 remote-ap wan-outage mode enable
set ap 17 remote-ap wan-outage extended-timeout 72h
set ap 17 radio 1 mode enable
set ap 17 radio 2 mode enable
set ap 18 serial-id pb3512274349 model WLA322-WW
set ap 18 name WLA18
set ap 18 remote-ap wan-outage mode enable
set ap 18 remote-ap wan-outage extended-timeout 72h
set ap 18 radio 1 mode enable
set ap 18 radio 2 mode enable
set ap 19 serial-id pb3512271419 model WLA322-WW
set ap 19 name WLA19
set ap 19 remote-ap wan-outage mode enable
set ap 19 remote-ap wan-outage extended-timeout 72h
set ap 19 radio 1 mode enable
set ap 19 radio 2 mode enable
set vlan 1 port 2
set vlan 1 port 3
set vlan 1 port 4
set vlan 1 port 5
set vlan 1 port 6
set vlan 1 port 7
set vlan 1 port 8
set vlan 4 name Gestion
set vlan 4 port 1 tag 4
set vlan 123 name Wireless
set vlan 123 port 1 tag 123
set vlan 125 name Wireless_inv
set vlan 125 port 1 tag 125
set interface 4 ip 172.16.2.10 255.255.252.0
set interface 123 ip dhcp-client enable
set interface 125 ip dhcp-client enable
set security acl name portalacl permit udp 0.0.0.0 255.255.255.255 eq 68 0.0.0.0 255.255.255.255 eq 67
set security acl name portalacl deny 0.0.0.0 255.255.255.255 capture
commit security acl portalacl

 

 

And checking the status of the WLAs y only see a few of them:

 

WLC880R# show ap status all
Flags: o = operational[8], c = configure[0], d = download[0], b = boot[0]
x = down[11]
a = auto AP, m = mesh AP, p/P = mesh portal (ena/actv), r = redundant[0]
z = remote AP in outage, i/I = insecure (control/control+data)
u = unencrypted, e/E = encrypted (control/control+data)
Radio: E = enabled - 20MHz channel, S = sentry
W/w = enabled - 40MHz wide channel (HTplus/HTminus)
D = admin disabled, U = mesh uplink
IP Address: * = AP behind NAT

AP Flag IP Address Model MAC Address Radio 1 Radio 2 Uptime
---- ---- --------------- ------------ ----------------- ------- ------- ------
1 o--i 172.16.34.2 WLA322-WW b0:a8:6e:47:67:00 E 6/18 W 36/18 30m33s
2 o--i 172.16.33.221 WLA322-WW b0:a8:6e:4d:2d:c0 E 11/16 W 36/18 31m18s
3 o--i 172.16.33.219 WLA322-WW b0:a8:6e:47:84:c0 E 1/16 W 44/18 30m30s
4 x--- WLA322-WW
5 x--- WLA322-WW
6 x--- WLA322-WW
7 x--- WLA322-WW
8 o--i 172.16.33.218 WLA322-WW 40:b4:f0:21:80:c0 E 6/18 W 36/18 30m22s
9 o--i 172.16.33.222 WLA322-WW b0:a8:6e:47:58:c0 E 6/18 W 36/18 30m21s
10 x--- WLA322-WW
11 x--- WLA322-WW
12 o--i 172.16.33.223 WLA322-WW 40:b4:f0:21:75:c0 E 6/18 W 44/18 30m23s
13 x--- WLA322-WW
14 x--- WLA322-WW
15 x--- WLA322-WW
16 x--- WLA322-WW
17 o--i 172.16.33.225 WLA322-WW b0:a8:6e:47:7c:80 E 1/16 W 44/18 30m39s
18 o--i 172.16.33.13 WLA322-WW b0:a8:6e:47:50:80 E 1/16 W 44/18 30m06s
19 x--- WLA322-WW

 

 

Any idea of what could be happening??

Another thing, how can i remove the acl configured, i tried several ways but its not possible...

 

Thanks!!

4 REPLIES 4
Highlighted
WLA/WLC Series

Re: WLC 880R recognizes only 8 WLA HELP!!

‎10-03-2013 03:16 AM

hi,

 

  • fresh (unused) AP ? No static boot-configuration on APs ?
  • tested moving APs between EX4200 ports ?
  • please check all APs get IP from DHCP server. Is it L2 or L3 (routed) AP<>WLC connection ? 
  • can you ping APs from WLC ? Keep in mind the APs may restart every minute.
  • please verify 'show ap unconfigured' output

http://kb.juniper.net/InfoCenter/index?cmid=no&page=content&id=KB20600 lists some traces you can collect.

Enable just one WLA you have problem with. Disable other EX4200 ports.

 

Regarding ACL removal please test: clear security acl ABC followed by commit security acl ABC 

jtb

Highlighted
WLA/WLC Series

Re: WLC 880R recognizes only 8 WLA HELP!!

‎10-03-2013 06:23 AM

Did you do the basisc and checked if they worked on the ports.

mad address in mac table.

Getting IP.

 

If the WLC and are in the same VLAN is should be not hassle, else u need dns or dhcp option 43 for the aps to find the wlc.

 

you can set up trace levels as well if they concact the controller but fail to boot properly.


Best Regards

Tom Roholm
JNCIS-ENT, FWV, SEC, SA, WLAN
Highlighted
WLA/WLC Series

Re: WLC 880R recognizes only 8 WLA HELP!!

‎10-03-2013 05:17 PM

Thanks for the replies!

 

I finally got it working, the OyM team connected the WLAs in the incorrect ports. I got the MAC address of the WLAs and checked the MAC table of the EX4200 switch and I realized that the WLAs which didn't came up were in the wrong VLAN.

 

A problem that I noticed is that when I reboot the WLC800R it don't recognizes the WLAs, I have to clear and re-add them to be recognized by the WLC880R. A bit strange...

 

Anyway, thanks!

 

Highlighted
WLA/WLC Series

Re: WLC 880R recognizes only 8 WLA HELP!!

‎10-06-2013 07:55 PM

MSS7.7.1.6 find a bug, please upgrade as soon as 7.7.4.4 or later

Feedback