Wireless LAN
Wireless LAN

Controlling Multicast (Bonjour) with WLC800

12.05.11   |  
‎12-05-2011 11:40 PM

Hi All,

 

We upgraded to Trapeze MX800R (WLC800) recently from a Nortel branded Trapeze (WSS 2330).

The devices are almost exactly the same but we are experiencing a very weird problem.

 

We have a number of Apple TVs connected to the system that should be broadcasting in a certain VLAN that out ipads join. Unfortunatey although the Apple TV is working correctly it does not show up when it is connected to the Wireless (connected it via a wired port on the same VLAN works find)

 

We have matched the settings that were on the Nortel device but this makes no difference...! We are at wits end with this one and cannot work out what is wrong. Other multicast devices are showing up....

 

Anyone have any ideas?

 

Thanks,

 

8 REPLIES
Wireless LAN

Re: Controlling Multicast (Bonjour) with WLC800

05.10.12   |  
‎05-10-2012 03:48 AM

I got the same problem any help ???

Wireless LAN

Re: Controlling Multicast (Bonjour) with WLC800

06.27.12   |  
‎06-27-2012 12:39 AM

Hi guys,

 

I have no experience with this or any of the devices, but who don't you make a support case and get some assistance from JTAC ?

 

Good luck, and do update the thread when you get enlightment :-)

 

//Tom


Best Regards

Tom Roholm
JNCIS-ENT, FWV, SEC, SA, WLAN
Wireless LAN

Re: Controlling Multicast (Bonjour) with WLC800

07.24.12   |  
‎07-24-2012 07:27 PM
Something similar happened to me during testing with the WLC800 and 522. It ended up being the VLAN id for the connected SSID didn't match the VLAN id for the port connecting the WLC to the switch. Once I changed the VLAN data on the WLC to match the switch it all started working. I hope it helps.
Wireless LAN

Re: Controlling Multicast (Bonjour) with WLC800

07.24.12   |  
‎07-24-2012 08:04 PM
What MSS version are you running btw ? Potentially it could be a MC feature in the new software you have to enable/disable or even configure.

Best Regards

Tom Roholm
JNCIS-ENT, FWV, SEC, SA, WLAN
Wireless LAN

Re: Controlling Multicast (Bonjour) with WLC800

08.24.12   |  
‎08-24-2012 10:30 AM

Is there any update on this Multicast/Bonjour issue? I'm getting a requirement for Apple TV as well.

Wireless LAN

Re: Controlling Multicast (Bonjour) with WLC800

08.25.12   |  
‎08-25-2012 02:42 PM

I heard from inside Juniper that bonjour support is in the works.

I do not have much information yet, working on it.


Best Regards

Tom Roholm
JNCIS-ENT, FWV, SEC, SA, WLAN
Wireless LAN

Re: Controlling Multicast (Bonjour) with WLC800

09.11.12   |  
‎09-11-2012 11:15 PM

Hi Everyone,

 

Just a quick update. We have recently upgarde to 7.7 and his issue has been resolved.


Thanks,

Wireless LAN

Re: Controlling Multicast (Bonjour) with WLC800

09.12.12   |  
‎09-12-2012 07:14 AM

So with 7.7 you can have the ATV in one VLAN and lients in a different one and it will work ?

 


Best Regards

Tom Roholm
JNCIS-ENT, FWV, SEC, SA, WLAN