vMX
Highlighted
vMX

how to display LFIB in Junos ?

Wednesday

What Junos command is similar to Cisco command:

show mpls ldp bindings 6.6.6.6 32

thanks !!

4 REPLIES 4
Highlighted
vMX

Re: how to display LFIB in Junos ?

Wednesday

I'm not familiar with Cisco but it looks like you want ldp sessions to an endpoint which would be

 

show ldp session 6.6.6.6

show ldp neighbor 6.6.6.6

Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home
Highlighted
vMX

Re: how to display LFIB in Junos ?

Wednesday

show route table inet.3 6.6.6.6 detail
show route table mpls.0 detail

Highlighted
vMX

Re: how to display LFIB in Junos ?

yesterday

Cisco tells what label a device allocates its directly connected prefix:

P-3#show mpls ldp bindings 6.6.6.6 32

  lib entry: 6.6.6.6/32, rev 38

        local binding:  label: 31

        remote binding: lsr: 7.7.7.7:0, label: 32

        remote binding: lsr: 4.4.4.4:0, label: 31

        remote binding: lsr: 2.2.2.2:0, label: 32

 

I like to know what label a juniper device allocates a label to its directly connected prefix.

 

thanks !!

Highlighted
vMX

Re: how to display LFIB in Junos ?

yesterday

I think what you want then is this command to see the label database for the specificed node address

show ldp database session 6.6.6.6

 

Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home
Feedback