vMX
Highlighted
vMX

inter-connection between Bridge domain

[ Edited ]
‎04-14-2020 03:43 PM

Capture.JPG

Can I use lt-0/0/0 interface to connect two bridge domains?

vMX-L2-R
set interfaces ge-0/0/0 vlan-tagging
set interfaces ge-0/0/0 encapsulation extended-vlan-bridge
set interfaces ge-0/0/0 unit 0 vlan-id 600
set interfaces ge-0/0/1 vlan-tagging
set interfaces ge-0/0/1 encapsulation extended-vlan-bridge
set interfaces ge-0/0/1 unit 600 vlan-id 600

set routing-instances vs instance-type virtual-switch
set routing-instances vs bridge-domains BD-inst vlan-id 600
set routing-instances vs bridge-domains BD-inst interface ge-0/0/0.0
set routing-instances vs bridge-domains BD-inst interface ge-0/0/1.600
set routing-instances vs bridge-domains BD-inst interface lt-0/0/0.600 set routing-instances vs bridge-domains BD-inst routing-interface irb.600 set interfaces irb unit 600 family inet address 10.10.10.1/24

set interfaces ge-0/0/2 vlan-tagging set interfaces ge-0/0/2 encapsulation extended-vlan-bridge set interfaces ge-0/0/2 mac 00:05:86:71:f0:02 set interfaces ge-0/0/2 unit 0 vlan-id 4081 set interfaces ge-0/0/3 vlan-tagging set interfaces ge-0/0/3 encapsulation extended-vlan-bridge set interfaces ge-0/0/3 mac 00:05:86:71:f0:03 set interfaces ge-0/0/3 unit 4081 vlan-id 4081 set logical-systems LS interfaces irb unit 4081 family inet address 10.10.10.2/24 set logical-systems LS bridge-domains BD-2 domain-type bridge set logical-systems LS bridge-domains BD-2 vlan-id 4081 set logical-systems LS bridge-domains BD-2 interface ge-0/0/2.0 set logical-systems LS bridge-domains BD-2 interface ge-0/0/3.4081 set logical-systems LS bridge-domains BD-2 routing-interface irb.4081 set logical-systems LS bridge-domains BD-2 interface lt-0/0/0.4081 set interfaces lt-0/0/0 unit 600 encapsulation vlan-bridge set interfaces lt-0/0/0 unit 600 vlan-id 600 set interfaces lt-0/0/0 unit 600 peer-unit 4081 set interfaces lt-0/0/0 unit 4081 encapsulation vlan-bridge set interfaces lt-0/0/0 unit 4081 vlan-id 4081 set interfaces lt-0/0/0 unit 4081 peer-unit 600 root@vMX-L2-R# commit [edit interfaces] 'lt-0/0/0' VLAN-ID on peer-units 4081(LS) and 600 do not match. error: configuration check-out failed

Normally I use physical cable to do this. It works .  But in EVE, I tried to use lt-0/0/0 interface. Can I do this ?

 

thanks !!

3 REPLIES 3
Highlighted
vMX
Solution
Accepted by topic author gongyayu
‎04-16-2020 06:27 AM

Re: inter-connection between Bridge domain

‎04-14-2020 09:57 PM

Hello,

 


@gongyayu wrote:

 

Can I use lt-0/0/0 interface to connect two bridge domains?


 

yes You can but You are missing this line:

 

set chassis fpc 0 pic 0 tunnel-services bandwidth 1g

 

 


@gongyayu wrote:

 I tried to use lt-0/0/0 interface. Can I do this ?

 



I don't have experience with "EVE" but regular (v)MX suppots LT interfaces just fine - see above for necessary command line.

And some more comments:

1/ You are basically creating one big bridge domain/BD with this interconnect so what's the point here? You could create a single BD with all Ethernet interfaces mentioned and live happily ever after. I never use such BD interconnect in my designs, and never had to

 2/ If You are still insisting on this LT interconnect, then aligh VLAN-ids on both sides of LT interface pair. If You are worried about 802.1Q tags, then JUNOS BD has VLAN normalization enabled by default, so Your VLAN tags will get rewritten on entry to each BD automatically.

 

HTH

Thx

Alex

_____________________________________________________________________

Please ask Your Juniper account team about Juniper Professional Services offerings.
Juniper PS can design, test & build the network/part of the network as per Your requirements

+++++++++++++++++++++++++++++++++++++++++++++

Accept as Solution = cool !
Accept as Solution+Kudo = You are a Star !
Highlighted
vMX

Re: inter-connection between Bridge domain

‎04-16-2020 06:27 AM

I do have that line.

thanks !!

Highlighted
vMX

Re: inter-connection between Bridge domain

‎04-17-2020 07:25 AM

Juniper JSPX mentioned the lt-0/0/0 only supports L3 inter-connection. L2 needs physical cable to inter connection.

Feedback